Become a job-ready network engineer with hands-on Cisco Packet Tracer labs in switching, routing, OSPF, IP services, security and automation, aligned to CCNA 200-301
A 12-week, lab-first program aligned to the Cisco CCNA 200-301 exam that prepares you for network engineer, NOC and IT support roles. You start with Git and GitHub to version device configs, then learn the OSI and TCP/IP models, cabling, Ethernet and IPv4/IPv6 addressing with lots of subnetting practice. In the free Cisco Packet Tracer you build VLANs, trunks, spanning tree and EtherChannel, configure static routing and OSPF, and set up DHCP, DNS, NAT, NTP, SNMP and Syslog. You design wireless and WAN networks, secure devices with SSH, AAA, ACLs, port security and DHCP snooping, and automate Cisco devices with Python, Netmiko and Ansible. You troubleshoot like a NOC engineer with Wireshark and learn AWS VPC basics. Every week ends with a lab whose configs and show outputs are pushed to GitHub and reviewed by AI.
Category: Computer Networking
Level: Beginner
Length: 12 weeks, online and self-paced
Price: ₹5,999
Rating: 8.5/10
What you will learn
Use Git and GitHub to version and review network device configurations
Explain the OSI and TCP/IP models, Ethernet, MAC addresses, TCP and UDP
Subnet IPv4 networks quickly and design VLSM and IPv6 addressing plans
Build and configure networks in Cisco Packet Tracer using the IOS command line
Segment LANs with VLANs, 802.1Q trunks and inter-VLAN routing
Prevent loops with STP and Rapid PVST+ and bundle links with EtherChannel
Configure static, default and floating static routes for IPv4 and IPv6
Configure, verify and troubleshoot single-area OSPFv2
Set up DHCP, DNS, NAT/PAT, NTP, SNMP, Syslog and TFTP backups
Design controller-based wireless networks secured with WPA2 and WPA3
Understand WAN options, VPNs and SD-WAN
Harden devices with SSH and AAA and filter traffic with standard and extended ACLs
Protect the access layer with port security, DHCP snooping and Dynamic ARP Inspection
Automate Cisco devices with Python, REST APIs, Netmiko, NAPALM and Ansible
Troubleshoot methodically with show and debug commands and Wireshark
Prepare for the CCNA 200-301 exam and network engineer interviews
Skills
Version control with Git and GitHub
OSI and TCP/IP networking
IPv4 subnetting and VLSM
IPv6 addressing
Cisco IOS configuration
Cisco Packet Tracer
VLANs, trunking and STP
Static routing and OSPF
DHCP, DNS and NAT
Wireless LAN and WAN design
ACLs and network security
Network automation with Python and Ansible
Wireshark packet analysis
Network troubleshooting
Network documentation and change management
Frequently asked questions
Do I need prior experience?
No. The course starts from how networks work. You need basic computer skills and a laptop with at least 8 GB of RAM to run Cisco Packet Tracer.
How long is the course and how much time do I need each week?
The course runs for 3 months, with 12 weekly modules. Most learners spend 8–10 hours a week. It is self-paced, so you can go faster or slower.
How are my assignments reviewed?
You push your code to GitHub and AI reviewers check it for bugs, quality and security within minutes, with clear fixes.
Will I get a certificate?
Yes. Finish the weekly assignments and the final project to download a verified certificate with a unique ID that employers can check.
Can I ask questions if I get stuck?
Yes. Use Ask your mentor inside any week to send a question to your mentor.
What roles does this course prepare me for?
Networking Fundamentals & CCNA prepares you for roles such as Network Engineer, Network Administrator, NOC Engineer and IT Support Engineer (Networking). The projects you push to GitHub become a portfolio you can show in interviews.